If not, the wire that delivers battery power to the props may have simply come loose. If you find anything wrapped around the props, carefully remove it, then check to see if the props are working again.
Chances are, something like seaweed or fishing line has simply gotten tangled up in the props. Turn off the trolling motor and fold it up into the boat. In this case, something has caused your props to stop spinning without actually killing the motor. When you’re out on the water, you may notice that your motor is still running, but you’re not going anywhere. Again, double check all the connections and inspect for corrosion before you spring for a new battery. If that doesn’t work, you may need a new battery. Once you’re back on land, try recharging the battery. It’s a good idea to keep a set of oars or paddles in your boat for situations such as this. If you can’t find any loose connections, chances are, you won’t be able to fix the problem while out on the water. If possible, check all the connections to make sure nothing has simply loosened up. If you’re out on the water and the motor suddenly dies, you may be dealing with an electrical problem, or the battery may need recharging. If you’re not sure where they should be connected, consult your owner’s manual. If you find any loose parts, either in the motor head or the control box, simply reconnect the wires in the appropriate spots. If everything looks good inside your motor head, remove the covering from the control box and check all the connections there. Be sure not to disconnect anything while performing your inspection. If you suspect a loose connection, open up the motor head and check all the internal components. Parts inside the motor head or control box may shake loose with repeated uses. This may be the case if your trolling motor stops working when you’re on the water, or if you buy a new trolling motor and can’t get the props to spin. Loose ConnectionĪnother thing that may cause the props to stop working is a loose connection. You should be able to find the name of the part by looking in your owner’s manual, and you can then buy a replacement part online through Minn Kota. If you find any corroded or broken parts, you will simply have to remove the part and get it replaced. Look to see if anything looks rusty or broken.
Then, visually inspect each part inside the motor head. Use a screwdriver to remove the outer covering on the motor head. If the corrosion is extensive enough, or if essential components of the motor head have rusted through, the props may stop turning. If even a little bit of water found its way inside the motor head, then internal wires, plugs, or circuit breakers may have rusted. If the props were spinning the last time you used it, but won’t work now, something inside the motor head may have corroded. What could be causing the problem, and how do you fix it? 1.
Whatever the case may be, you’re probably left wondering what to do about it. Or maybe the motor is brand new, or you recently bought it used, and you can’t get the props to start spinning at all. Worse yet, maybe you’re out on the water and the props suddenly stop spinning, leaving you stranded or with no choice but to paddle your way back to shore.
Maybe it was working the last time you went boating, but now, only a few days or weeks later, the props won’t turn. The truth is, a trolling motor’s props may stop spinning for a number of reasons.
#Minn kota all terrain 40at how to
Air up an inflatable boat using a foot pump and an electric pump 5 Causes and How to Fix Them Click image for more info
0 kommentar(er)
